AIAN Touchless Sanitizer Dispenser For Business Use – Premium, 1.2L, Wall Mounted

AIAN Touchless Sanitizer Dispenser for Business Use makes perfect sense for your business. Since it uses any 3rd party made rubbing alcohol automatically sanitize hands placed inside the unit.  You can use 2500 to 2800 times of spray with a full tank (1.2 Liter, 0.317 Gallon), which typically runs about a month, depending on the frequency of use.  AIAN Touchless Sanitizer Dispenser is a great fit for your business.


It is wall-mounted, taking a simple step for installation. Here is the CDC guideline why you need to use alcohol sanitizer.  “Germs are everywhere! They can get onto hands and items we touch during daily activities and make us sick. Cleaning hands at key times with soap and water or hand sanitizer that contains at least 60% alcohol is one of the most important steps you can take to avoid getting sick and spreading germs to those around you”.


Manual pump type sanitizer dispenser or gel type is not enough.

Germs, viruses, also COVID-19 can easily spread through the high-touch area including the handle on the sanitizer pump. Therefore, you need a touchless or touch-free machine that sprays alcohol onto your hands.


Gel vs. Liquid Sanitizer

Typically, Liquid Sanitizer, containing at least 60% alcohol, works faster than Gel Sanitizer. The liquid type takes less than 15 seconds for the germicidal effect in place.  However, gel-type would take longer; it takes up to 30 seconds, which is too long for removing viruses and bacteria.

AIAN Touchless Sanitizer Dispenser cost you less

One may think AIAN Touchless Sanitizer Dispenser is expensive than other dispensers in the market.   However, AIAN Touchless Sanitizer takes any 3rd party made Alcohol. Some dispensers require you to use sanitizer from the manufacturer of the dispenser and usually the dispenser is inexpensive, however, sanitizer cost will be higher if you tie your dispenser with a certain type of sanitizer.

A business case:  Sanitizer Dispenser AND Sanitizer manufacturer (Brand A)  vs. a 3rd party made alcohol

Assumption Brand A (Gel type) 3rd party made (Alcohol type)
1 month of use $163 (0.264 Gallon)

$652 (per gallon)

$21 (1 gallon)
6 months of use $3,912 ($652 x 6) $126
1-year use $7,824 $1512

As you can see from the above business case, a manufacturer of brand A provides both sanitizer and dispenser, which cost you over $7,000 operating for 1st year.  However, if you use any 3rd party made rubbing alcohol certified by FDA will cost you only $1512 during 1 year of operation.   In addition to that, the gel sanitizer is not as effective as an alcohol-based sanitizer since the gel type takes longer to be effective.

How to fill liquid alcohol sanitizer

Please follow the steps below after installation of the sanitizer dispenser onto the wall (for installation, please read the installation guide provided in the package; installation takes only a few minutes).


Steps Photo
1. Open up the top cover located on the top of the unit(the plastic cover has inter-locking to the receptacle holes, which can be easily removed.  2. After opening the plastic cover,  3. Then unscrew the tank cap.

CAUTION:  Unplug the power before opening the cover.

Opening up the alcohol tank cap
3. Put the plastic funnel into the tank shown on the top of the unit. (the funnel comes with the package). Putting plastic funnel into the unit
4. Fill the tank with alcohol, then close the tank cap and top cover. (Watch carefully while you are filling the alcohol and try to avoid overflow)

Caution: spilled alcohol inside the unit may cause malfunctioning. Wait till it dries out completely before plugging in the power.

Filling the tank with alcohol
5. Ready to operate.  (Turn the power on). Ready to use
6. In operation. AIAN Touchless Sanitizer Dispenser in operation


Click to find further details of the AIAN Touchless Sanitizer Dispenser